LED sensor light 2FT/4FT,CCT 3000K/4000K/5000K/6000K,Multi-function Smart Inverter,Emergency LED Batten Fixture

LED sensor light 2FT/4FT,CCT 3000K/4000K/5000K/6000K,Multi-function Smart Inverter,Emergency LED Batten Fixture

 

1.Bridge wiring in fitting, no need consider power direction of led tube,safe and convenient.
2.0.5mm thickness steel housing with white coating,steel wire guard for protection
3.Smart inverter for multi-function,for emergency power supply.

 

Description

What is LED sensor light

LED sensor tri-proof lights are a type of lighting fixture that integrates LED technology with motion sensors, light sensors, or both. These lights are often used in outdoor or industrial environments where energy efficiency and convenience are important. The sensors enable the light to automatically turn on when motion is detected or when ambient light levels drop below a certain threshold, and to turn off when no motion is detected or when sufficient ambient light is available. This functionality helps to save energy by ensuring that the light is only activated when needed.

LED sensor light

 

LED sensor light Features(J-Series)

-0.5mm thickness steel housing with white coating
-Steel wire guard for protection IP20 rate
-Small Seperate fixed plate with Huge terminal block and safety hookers for easy installation
-Innovation design for sliding installation of housing body without wiring,easy mantainence
-easy openable backside design for quick mantainance.
-2FT,4FT and Single tube or Double tube option
-Single end power in,PC+AL heat sink led tube, more safety
-Bridge wiring in fitting, no need consider power direction of tube
-Smart inverter for multi-function (option)
-5.8G HF microwave Sensor dimming function (option).
-Emergency function,battery with special housing for quick maintenance (option)
-Approved by CE SAA and C-Tick (RCM).
-5 years warranty

LED Sensor Tri-proof Lights Advantages

LED sensor lights offer numerous advantages over traditional lighting solutions:

Energy Efficiency: LED technology provides highly efficient illumination, consuming less energy compared to traditional lighting sources. When equipped with motion and light sensors, LED sensor tri-proof lights can further optimize energy usage by automatically adjusting brightness levels based on occupancy and ambient light conditions.

Durability: Constructed with rugged materials and featuring a steel wire guard for added protection, LED sensor tri-proof lights are designed to withstand challenging environments. With an IP20 rating, these lights ensure durability and longevity even in harsh conditions.

Intelligent Control: The integration of motion and light sensors enables LED sensor tri-proof lights to operate intelligently. They can automatically turn on/off or dim based on occupancy and natural light levels. This intelligent control not only enhances energy efficiency but also provides added convenience and security.

LED sensor light PARAMETER DATA(J-Series):

Model Input voltage Watt Sensor dimming standby Emergency
ZL-JTBLP9-2FT-CN AC110V or 230V 1*9w x x
ZL-JTBLP18-4FT-CN AC110V or 230V 1*18w x x
ZL-JTBLP18-2FT-CN AC110V or 230V 2*9w x x
ZL-JTBLP36-4FT-CN AC110V or 230V 2*18w x x
ZL-JTBLP9-2FT-CS AC110V or 230V 1*9w 100% / 20% /OFF x
ZL-JTBLP18-4FT-CS AC110V or 230V 1*18w 100% / 20% /OFF x
ZL-JTBLP18-2FT-CS AC110V or 230V 2*9w x
ZL-JTBLP36-4FT-CS AC110V or 230V 2*18w x
ZL-JTBLP9-2FT-CE AC110V or 230V 1*9w x >3hrs@3.6W
ZL-JTBLP18-4FT-CE AC110V or 230V 1*18w x >3hrs@3.6W
ZL-JTBLP18-2FT-CE AC110V or 230V 2*9w x >3hrs@3.6W
ZL-JTBLP36-4FT-CE AC110V or 230V 2*18w x >3hrs@3.6W
ZL-JTBLP9-2FT-CES AC110V or 230V 1*9w 100% / 20% /OFF >3hrs@3.6W
ZL-JTBLP18-4FT-CES AC110V or 230V 1*18w 100% / 20% /OFF >3hrs@3.6W
ZL-JTBLP18-2FT-CES AC110V or 230V 2*9w >3hrs@3.6W
ZL-JTBLP36-4FT-CES AC110V or 230V 2*18w >3hrs@3.6W
Note: x –No this function

 

LED sensor light Dimension(J-Series):

LED sensor light Size Dimension

LED Sensor Tri-Proof Lights Applications

LED sensor tri-proof lights are versatile fixtures that can be used in a wide range of applications, including:

warehouses LED Sensor Lights: LED sensor tri-proof lights are commonly used in industrial settings such as warehouses, factories, manufacturing plants, and workshops. Their rugged construction and intelligent control features make them ideal for providing reliable and energy-efficient lighting in demanding environments.

supermarkets LED Sensor Lights: These fixtures are also suitable for commercial buildings such as retail stores, supermarkets, offices, and restaurants. The motion sensing capability allows for automatic lighting control in areas with fluctuating occupancy, enhancing energy savings and convenience for occupants.

Parking lots LED Sensor Lights: LED sensor tri-proof lights are well-suited for outdoor applications such as parking lots, garages, building exteriors, and walkways. Their weatherproof design and high resistance to water and dust make them reliable fixtures for providing safe and efficient lighting in outdoor environments.

Train stations LED Sensor Lights: LED sensor tri-proof lights can be installed in transportation hubs such as airports, train stations, and bus terminals to provide bright and energy-efficient lighting for passenger areas, platforms, and corridors. The motion sensing feature helps improve safety and security by ensuring adequate lighting in high-traffic areas.

LED sensor light Product Certificate

CE、RoHS SAA C-Tick

 

FAQs:

How long do LED sensor lights last?

LED sensor lights typically have a lifespan ranging from 20,000 to 100,000 hours, depending on the quality of the LED chips and the operating conditions. This translates to several years of reliable use, making them a long-lasting lighting solution.

What is the best outdoor motion sensor light?

The best outdoor motion sensor light is the COMLED sensor batten light, which depends on various factors such as brightness, range, sensitivity, durability, and specific requirements. Some popular options include LED floodlights with adjustable motion sensors, outdoor wall-mounted lanterns with built-in motion sensors, and pathway lights with motion detection capabilities. It’s essential to consider your specific needs and preferences when selecting the best outdoor motion sensor light for your property.

What is the difference between a light sensor and a motion sensor?

The main difference between a light sensor and a motion sensor lies in their functionality and purpose. A light sensor, also known as a photocell or dusk-to-dawn sensor, detects ambient light levels and automatically turns the light on at dusk and off at dawn. Motion sensor detects movement within its range and triggers the light to turn on.The former relies on sensing changes in the light source between day and night to determine the switch, while the latter relies on sensing motion signals to decide whether to illuminate.

Can sensor lights stay on all the time?

Sensor lights can stay on all the time if they are manually switched to the “on” position. Many sensor lights come with a mode selection switch that allows users to choose between automatic (sensor-activated) mode and manual (always-on) mode. it’s important to note that keeping sensor lights on continuously may lead to higher energy consumption and reduced bulb lifespan compared to using them in sensor-activated mode only when needed.

Do motion sensor lights turn on during day?

Most modern motion sensor lights come equipped with built-in photocells that prevent them from turning on during the day when sufficient natural light is available. This feature helps conserve energy and prevents unnecessary activation of the lights during daylight hours. It’s essential to ensure that the sensor’s sensitivity and ambient light threshold are properly adjusted to avoid false triggers due to changes in natural light levels.

Do sensor lights need to be wired in?

Yes, sensor lights typically need to be wired into the electrical system to function. There are also wireless options available that operate on battery power or solar energy. Wired sensor lights require connection to a power source, either through a direct electrical connection or a low-voltage transformer, to supply electricity to the light fixture and sensor components.

What is the best height for a motion sensor light?

The ideal height for a motion sensor light depends on various factors such as the light’s detection range, the area to be illuminated, and the specific mounting location. In general, mounting motion sensor lights at a height of 5 to 10 feet above the ground provides optimal coverage and detection range for most applications.

Additional information

Model

ZL-JTBLP9-2FT ZL-JTBLP18-2FT ZL-JTBLP18-4FT ZL-JTBLP36-4FT

Rated Power (Led tube)

1x9W 2x9W 1x18W 2x18W

Install

Surface Mount/Suspended/Linkable

Protection Rating

IP20

Housing

Steel with Coating

Optics

Polycarbonate Milky Diffuser

Connection Type

Terminal Block or Linkable

Operating Temperature

-20℃ to 40℃(Emergency version: 0℃ to 40℃)

Warranty

3 Years(battery for 1 year)

Dimming Option

Microwave Sensor – 3 Stepped Version(100%-20%-OFF)

Emergency Option

3 Hours+ @3W LiFePO4 Battery

    has been added to your cart:
    Checkout